high precision wraparound - wide ohmic value range thin film chip resistors p vishay sfernice www.vishay.com for technical questions, contact: sfer@vishay.com document number: 53017 60 revision: 15-mar-10 for low noise and precision applications, superior stability, low temperature coefficient of resistance, and low voltage coefficient, vishay sfernice?s proven precision thin film wraparound resistors exceed requirements of mil-prf-55342g characteristics y 10 ppm/c (- 55 c; + 155 c) down to 5 ppm/c (- 55 c; + 155 c). features ? load life stability at 70 c for 2000 h: 0.1 % under pn/0.05 % under pd ? low temperature coefficient down to 5ppm/c (- 55 c; + 155 c) ? very low noise < 35 db a nd voltage coefficient < 0.01 ppm/v ? wide resistance range: 10 to 50 m depending on size ? tolerances to 0.01 % ? in lot tracking 5 ppm/c ? termination: thin film technology ? gold plated or pre-tinned terminations over nickel barrier ? short circuits (jumpers) r < 50 mr, i < 2 a ? smd wraparound terminations ? withstand moisture resistance test of aec-q200 ? compliant to rohs directive 2002/95/ec dimensions in millimeters (inches) note ? case size 2512 under development. plea se consult vishay sfernice. * pb containing terminations are not rohs compliant, exemptions may apply ** please see document ?vishay material category policy?: www.vishay.com/doc?99902 case size ab c d/e max. tol. + 0.152 (+ 0.006) min. tol. - 0.152 (- 0.006) max. tol. + 0.127 (+ 0.005) min. tol. - 0.127 (- 0.005) nominal nominal nominal tolerance 0302 0.75 (0.029) 0.60 (0.024) 0.5 (0.02) 0.127 (0.005) 0.15 (0.006) 0.08 (0.003) 0402 1.00 (0.039) 0.60 (0.024) 0.25 (0.010) 0.1 (0.004) 0505 1.27 (0.005) 1.27 (0.050) 0.38 (0.015) 0.13 (0.005) 0603 1.52 (0.060) 0.85 (0.033) 0705/0805 1.91 (0.075) 1.27 (0.050) 1005 2.54 (0.100) 1.27 (0.050) 1206 3.06 (0.120) 1.60 (0.063) 0.40 (0.016) 1505 3.81 (0.150) 1.32 (0.052) 0.48 (0.019) 2010 5.08 (0.200) 2.54 (0.100) a d d c e e b
p high precision wraparound - wide ohmic value range thin film chip resistors vishay sfernice document number: 53017 for technical questions, contact: sfer@vishay.com www.vishay.com revision: 15-mar-10 61 suggested land pattern (to ipc-7351a) note ? case size 2512 under development. please consult vishay sfernice. electrical specifications notes ? case size 2512 under development. pl ease consult vishay sfernice. (1) pn = nominal power - pd = derated power intended to improve stability. (2) for ohmic range versus tolerance and tcr see detailed table page 62. chip size dimensions (in millimeter) z max. g min. x max. 0302 1.30 0.14 0.73 0402 1.55 0.15 0.73 0505 1.82 0.10 1.40 0603 2.37 0.35 0.98 0705/0805 2.76 0.74 1.40 1005 3.39 1.37 1.40 1206 3.91 1.85 1.73 1505 4.66 2.44 1.45 2010 5.93 3.71 2.67 case size power rating mw limiting element voltage v resistance range (2) pn (1) pd (1) 0302 40 30 25 10 to 500 k 0402 63 40 50 10 to 1.5 m 0505 125 50 50 10 to 4 m 0603 125 100 75 10 to 2.5 m 0705/0805 200 125 150 10 to 10 m 1005 250 125 75 10 to 5 m 1206 330 250 200 10 to 35 m 1505 350 175 75 10 to 10 m 2010 1000 500 300 10 to 50 m g min. z max. x max.
p vishay sfernice high precision wraparound - wide ohmic value range thin film chip resistors www.vishay.com for technical questions, contact: sfer@vishay.com document number: 53017 62 revision: 15-mar-10 electrical specifications resistance range: 10 to 50 m resistance tolerance: 0.1 % to 1 % 0.01 % to 0.05 % on y type power dissipation: pn: 40 mw to 1 w pd: 40 mw to 500 mw on tolerance tighter than 0.05 % temperature coefficient: 5 ppm (0 c; 70 c); 10 ppm (- 55 c; + 155 c) climatic specifications operating temp. range: - 55 c to + 155 c for temperature up to 215 c, please consult factory mechanical specifications substrate: alumina technology: thin film film: nickel chromium with mineral passivation or crsi protection: silicone terminations: b type: snpb over nickel barrier for solder reflow n type: snag over nickel barrier g type: gold over nickel barrier for other applications notes (1) reduced temperature operating range: [0 c; + 70 c] option available for (- 25 c; + 85 c): 0027 and [- 55 c; + 155 c]: 0079 (2) r > 39 on request for lower values. power derating curve tolerance and tcr versus ohmic value note ? size 2512 under development. pleas e consult vishay sfernice. (3) 5 ppm/c in a reduced operating range (0 c; + 70 c). options available for operating range (- 25 c; + 85 c) and (- 55 c; + 155 c) upon request with price adder. temperature coefficient tcr code film 5 ppm/c (1)(2) znicr 10 ppm/c (2) ynicr 25 ppm/c e nicr 50 ppm/c h nicr or crsi 100 ppm/c k nicr or crsi 070 20 40 60 8 0 100 120 140 155 0 20 40 60 8 0 100 ambient temperature in c rated power ( % ) size value range tightest tolerance % best tcr (ppm/c) p0302 10r to 500k 0.1 50 10r to 75k 0.1 25 39r to 75k 0.05 25 39r to 50k 0.05 10 (5) (3) 100r to 50k 0.02 10 (5) (3) 250r to 50k 0.01 10 (5) (3) p0402 10r to 1m5 0.1 50 10r to 150k 0.1 25 39r to 150k 0.05 25 39r to 100k 0.05 10 (5) (3) 100r to 100k 0.02 10 (5) (3) 250r to 100k 0.01 10 (5) (3) p0505 10r to 4m 0.1 50 10r to 300k 0.1 25 39r to 300k 0.05 25 39r to 260k 0.05 10 (5) (3) 100r to 260k 0.02 10 (5) (3) 250r to 260k 0.01 10 (5) (3) p0603 10r to 2m5 0.1 50 10r to 500k 0.1 25 39r to 500k 0.05 25 39r to 332k 0.05 10 (5) (3) 100r to 332k 0.02 10 (5) (3) 250r to 332k 0.01 10 (5) (3) p0705/0805 10r to 10m 0.1 50 10r to 750k 0.1 25 39r to 750k 0.05 25 39r to 511k 0.05 10 (5) (3) 100r to 511k 0.02 10 (5) (3) 250r to 511k 0.01 10 (5) (3) p1005 10r to 5m 0.1 50 10r to 750k 0.1 25 39r to 750k 0.05 25 39r to 500k 0.05 10 (5) (3) 100r to 500k 0.02 10 (5) (3) 250r to 500k 0.01 10 (5) (3) p1206 10r to 35m 0.1 50 10r to 3m5 0.1 25 39r to 3m5 0.05 25 39r to 1m8 0.05 10 (5) (3) 100r to 1m8 0.02 10 (5) (3) 250r to 1m8 0.01 10 (5) (3) p1505 10r to 10m 0.1 50 10r to 1m 0.1 25 39r to 1m 0.05 25 39r to 750k 0.05 10 (5) (3) 100r to 750k 0.02 10 (5) (3) 250r to 750k 0.01 10 (5) (3) p2010 10r to 50m 0.1 50 10r to 6m 0.1 25 39r to 6m 0.05 25 39r to 3m 0.05 10 (5) (3) 100r to 3m 0.02 10 (5) (3) 250r to 3m 0.01 10 (5) (3)
p high precision wraparound - wide ohmic value range thin film chip resistors vishay sfernice document number: 53017 for technical questions, contact: sfer@vishay.com www.vishay.com revision: 15-mar-10 63 popular options for any option it is recommended to cons ult vishay sfernice for availability first. option: enlarged terminations: for stringent and special power dissipation requirements, the therma l resistance between the resistive layer and the solder joi nt can be reduced using enlarged terminations chip resistors which ar e soldered on large and thick copper pads acting as heatsink (see application note: 53048 power dissipation in high precision vi shay sfernice chip resistors and arrays (p thin film, pra arrays, chp thick film) www.vishay.com/doc?53048 . option to order: 0063 (applies to size 1206/1505/2010). dimensions (option 0063) in millimeters note ? case size 2512 under development. please consult vishay sfernice. suggested land pattern (option 0063) note ? case size 2512 under development. please consult vishay sfernice. case size abed f max. tol. + 0.152 min. tol. - 0.152 max. tol. + 0.127 min. tol. - 0.127 max. tol. + 0.13 min. tol. - 0.13 max. tol. + 0.13 min. tol. - 0.13 nominal nominal nominal nominal nominal min. max. 1206 3.06 1.60 0.40 1.215 0.63 0.50 0.76 1505 3.81 1.32 0.48 1.59 2010 5.08 2.54 2.25 chip size dimensions (in millimeter) z max. g min. x max. 1206 3.91 0.50 1.73 1505 4.66 1.45 2010 5.93 2.67 a b d e f enlarged termination uncoatted ceramic bottom view for mountin g g min. z max. x max.
p vishay sfernice high precision wraparound - wide ohmic value range thin film chip resistors www.vishay.com for technical questions, contact: sfer@vishay.com document number: 53017 64 revision: 15-mar-10 option: tightest temperat ure coefficient on exte nded temperature range option to order 0027: tcr: 5 ppm/c in [- 25 c; + 85 c] temperature range. price adder will apply. please consult vishay sfernice. option to order 0079: tcr: 5 ppm/c in [- 55 c; + 155 c] temperature rang e. price adder will apply. please consult vishay sfernice. option: high temperature for applications such as down hole drilling, high temperature withstanding is required. vishay sfernice offers an option for utilization on extended temperatur e range: [- 55 c; + 215 c] powered (and up to 230 c unpowered). for guidance in designs, please refer to application note: 5 3047 power dissipation considerations in high precision vishay sfernice thin film chip resistors and arrays (p, pra etc.) (high temperature application) www.vishay.com/doc?53047 . option to order 0031: recommended terminations: gold (< 1 ) performances: best temperature coefficient: 5 ppm/c in [0 c; + 70 c] 10 ppm/c [- 55 c; + 155 c] 15 ppm/c [- 55 c; + 185 c] 25 ppm/c [- 55 c; + 215 c] power rating: 0.1 x pn caution : performances obtained with following mounting conditions: pcb: polymide solder paste: pbsnag (93.5/5/1.5) best tolerance after high temperature assembly: 0.1 % long term stability: 0.5 % after 1000 h at 215 c (ambient temperature) at 0.1 pn stability after 4000 h unpowered 4500 4000 3500 3000 2500 2000 1500 1000 500 0 0 200 400 600 8 00 1000 1200 1400 1600 1 8 00 2000 2200 2400 2600 2 8 00 3000 3200 3400 3600 3 8 00 4000 - 500 230 c 215 c 200 c 1 8 5 c r/r ch/ppm h
p high precision wraparound - wide ohmic value range thin film chip resistors vishay sfernice document number: 53017 for technical questions, contact: sfer@vishay.com www.vishay.com revision: 15-mar-10 65 option: marking option to order 0013: marking of ohmic value and tolerance: sizes: 0805 to 1005: 3 digits marking (according to eia-96) sizes: 1206 to 2010: 4 digits marking (same c odification than in the ordering procedure) tolerance indicated by a color dot. option to order 0014: marking of ohmic value: sizes: 0805 to 1005: 3 digits marking (according to eia-96) sizes: 1206 to 2010: 4 digits marking (same c odification than in the ordering procedure) no standard marking available for smaller sizes. a price adder will apply to the unit pric e of the parts for options 0013 and 0014. option: aec-q200 moisture resistance option to order 0058: specific production process to withstand 85 c/85 % at pn/10 packaging esd packaging available: waffle-pack, and plastic tape and reel (low conductivity). paper tape available upon request (esd only). note (1) 12 mm on request packaging rules waffle pack can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. when quantity ordered exceeds maximum quantity of a single waffle pack, the waffle packs are stacked up on the top of each other and closed by one single cover. to get ?not stacked up? waffle pack in case of ordered quantity > maximum number of pieces per package: please consult vish ay sfernice for specific ordering code tape and reel can be filled up to maximum quantity indicated in the table here above, taking into account the minimum order quantity. when quantity ordered is between the moq and the maximum reel capacity, only one reel is provided. when several reels are needed for ordered quantity within moq and maximum reel capacity: please consult vishay sfernice for specific ordering code notes (2) 0.05 % under pd (3) option to order size moq number of pieces per package tape width waffle pack 2 " 2 " tape and reel min. max. 0302 100 100 100 4000 8 mm 0402 0505 0603 0805 0705 1005 221 1206 140 1505 60 2010 100 2000 8 mm (1) performance tests conditions mil or cecc requirements typical performances thermal shock mil-prf-55342g mil-std-202 f-method 107 f 0.05 % 0.02 % short time overload mil-prf-55342g para 3.10.4.7.5 0.05 % 0.01 % low temperature operation mil-prf-55342g para 3.9 and 4.7.4 0.05 % 0.01 % resistance to solder heat mil-prf-55342g para 3.12, 4.7.7, 4.7.1.2 0.05 % 0.03 % moisture resistance mil-prf-55342g para 3.13 and 4.7.8 mil-std-202 f-method 106 e 0.10 % 0.01 % cecc 56 days/40 c/93 % rh 0.10 % 0.01 % aec-q200 85 c/85 % rh/pn/10 1000 h 0.5 % + 0.05 max. < 0.3 % + 0.05 high temperature mil-prf-55342g para 3.11 and 4.7.6 0.05 % 0.05 % load life mil-prf-55342g 2000 h pn at 70 c mil-std-202 f-method 108 a 0.5 % 0.10 % (2)
p vishay sfernice high precision wraparound - wide ohmic value range thin film chip resistors www.vishay.com for technical questions, contact: sfer@vishay.com document number: 53017 66 revision: 15-mar-10 maximum permissible pulse load p i max. for single pulse energy for single pulse maximum permissible pulse voltage u i max. 0.1 1 10 100 pulse duration t ( s ) permissible pulse power (w) 0.00001 0.0001 0.001 0.01 0.1 1 10 p2512 p2010 p1206 p0 8 05 p0603 p0402 p 0.00001 1 10 100 pulse duration t (s) permissible pulse ener g y (j) 0.00001 0.0001 0.001 0.01 0.1 1 10 p2512 p2010 p1206 p0 8 05 p0603 p0402 0.0001 0.001 0.01 0.1 10 100 1000 10 000 pulse duration t (s) permissible pulse volta g e (v) 0.00001 0.0001 0.001 0.01 0.1 1 10 p2512 p2010 p1206 p0 8 05 p0603 p0402
p high precision wraparound - wide ohmic value range thin film chip resistors vishay sfernice document number: 53017 for technical questions, contact: sfer@vishay.com www.vishay.com revision: 15-mar-10 67 maximum permissible pulse load p i max. 1.2/50 s lightning surge 10/70 s lightning surge 0.1 1 10 100 pulse duration t (s) 0.00001 0.0001 0.001 0.01 0.1 1 10 p2512 p2010 p1206 p0 8 05 p0603 p0402 permissible pulse power (w) p 10 100 1000 10 000 resistor value ( ) test volta g e (v) 10 100 1000 10 000 100 000 p2512 p1206 p0 8 05 p0603 10 100 1000 10 000 resistor value ( ) test volta g e (v) 10 100 1000 10 000 100 000 p1206 p0 8 05 p0603
p vishay sfernice high precision wraparound - wide ohmic value range thin film chip resistors www.vishay.com for technical questions, contact: sfer@vishay.com document number: 53017 68 revision: 15-mar-10 notes ? chips ready to be tr immed available. ( p trim ) - please consult vishay sfernice. (1) for specific quantity of parts per packa ging please consult vishay sfernice. (2) for paper tape please consult vishay sfernice. quick prototyping vishay sfernice can offer quick prototyping service in 3 weeks production time for most popular case sizes: 0603, 0805, 1206 (best tolerance: 0.05 %, best tcr: 10 ppm/ c) - premium will apply - check availability global part number information new global part numbering: p0505y1003bbt0933 global model size tcr value tolerance termination packaging option p 0302 0402 0505 0603 0705 0805 1005 1206 1505 2010 k = 100 ppm/c h = 50 ppm/c e = 25 ppm/c y = 10 ppm/c x = jumper z = 5 ppm (0.70 c) the first three digits are significant figures and the last digit specifies the number of zeros to follow, r designates decimal point 10r0 = 10 3901 = 3900 1004 = 1 m 0r00 = jumper l = 0.01 % p = 0.02 % w = 0.05 % b = 0.1 % c = 0.25 % d = 0.5 % f = 1 % g = 2 % j = 5 % x = jumper b: snpb over nickel barrier n: snag over nickel barrier g: gold over nickel barrier blank = waffle pack t = tape (1) pt = paper tape (2) leave blank if no option b: lead bearing version n and g: lead (pb)-free/ rohs version historical part number example: p 0505 y 1003 b b tr r0933 e2 p 0505 y 1003 b b tr r0933 e2 historical model size tcr value tolerance termination packaging option rohs p 0302 0402 0505 0603 0705 0805 1005 1206 1505 2010 k = 100 ppm/c h = 50 ppm/c e = 25 ppm/c y = 10 ppm/c x = jumper z = 5 ppm (0.70 c) the first three digits are significant figures and the last digit specifies the number of zeros to follow, r designates decimal point 10r0 = 10 3901 = 3900 1004 = 1 m 0r00 = jumper l = 0.01 % p = 0.02 % w = 0.05 % b = 0.1 % c = 0.25 % d = 0.5 % f = 1 % g = 2 % j = 5 % x = jumper b: snpb over nickel barrier n: snag over nickel barrier g: gold over nickel barrier blank = waffle pack tr = tape (1) leave blank if no option e2: tin/silver e4: gold blank: snpb b: lead bearing version n and g: lead (pb)-free/ rohs version 0505y1003 p bbt 0 9 33
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
